Home Auto Repair How to Install Engine Block Heater on 2018 Honda Pilot

How to Install Engine Block Heater on 2018 Honda Pilot

215

Download 2018 Honda Pilot Engine Block Heater Installation Instructions – 1. Allow the engine and all cooling system components to cool down. 2. Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery, then wait at least 3 minutes before starting work. 3. Remove the three self-tapping screws from the left front wheel arch protector. 4. Remove the left front wheel arch protector. 5. Repeat steps 3 and 4 on the right side of the vehicle. 6.Remove the front bumper:

• Remove the intake air guide. • Remove the front upper grille. • Attach the masking tape to the areas shown on each side. • Remove four self-tapping screws, eight clips, four washer-bolts, and four flange bolts. • With the help of an assistant, release three retaining tabs and seven hooks on each side. • Release the front grille. • With the help of an assistant, remove the front bumper, and unplug the vehicle connectors. • Place the front bumper on a blanket to prevent damage. 8. Remove the battery.