Home Auto Repair How to Install the Fog Lights on a 2018 Honda Pilot

How to Install the Fog Lights on a 2018 Honda Pilot

99

Download 2018 Honda Pilot Fog Lights Installation Instructions – 1. Wrap a shop towel around the hood latch: • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery, then wait at least 3 minutes before starting work. 2. Remove the three self-tapping screws from the left front wheel arch protector. 3. Remove the left front wheel arch protector. 4. Repeat steps 2 and 3 on the right side of the vehicle. 5.Remove the front bumper:

• Remove the intake air guide. • Remove the front upper grille. • Attach the masking tape to the areas shown on each side. • Remove four self-tapping screws, eight clips, four washer-bolts, and four flange bolts. • With the help of an assistant, release three retaining tabs and seven hooks on each side. • Release the front grille. • With the help of an assistant, remove the front bumper and unplug the vehicle connector. • Place the front bumper on a blanket to prevent damage. 6. Remove one washer-bolt and one clip, and pull back the right front inner fender as shown.