Download 2018 Honda Pilot Front Lower Trim Installation Instructions – 1. Wrap a shop towel around the hood latch: • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery, then wait at least 3 minutes before starting work. 2. Remove the three self-tapping screws from the left front wheel arch protector. 3. Remove the left front wheel arch protector. 4. Repeat steps 2 and 3 on the right side of the vehicle. 5. Remove the front bumper: • Remove the intake air guide. • Remove the front upper grille.
• Attach the masking tape to the areas shown on each side. • Remove four self-tapping screws, eight clips, four washer-bolts, and four flange bolts. • With the help of an assistant, release three retaining tabs and seven hooks on each side. • Release the front grille. • With the help of an assistant, remove the front bumper and unplug the vehicle connectors. • Place the front bumper on a blanket to prevent damage. 6. Remove one flange bolt, one clip, and three self-tapping screws on each side of the front bumper.