Home Auto Repair How to Install Illuminated Door Sill Trim on 2018 Honda Pilot

How to Install Illuminated Door Sill Trim on 2018 Honda Pilot

76

Download 2018 Honda Pilot Illuminated Door Sill Trim Installation Instructions – 1. Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery, then wait at least 3 minutes before starting work. 2. Remove the passenger’s dashboard under cover and unplug the vehicle connector. 3. Remove the passenger’s door sill trim. 4. Pull away the door opening seal, and remove the passenger’s kick panel.

5. Pull away the door opening seal, and remove the driver’s dashboard side lid. 6. Remove the driver’s dashboard lower cover, unplug the vehicle connectors, and release the vehicle sensor. 7. Remove the driver’s door sill trim. 8. Pull away the door opening seal, and remove the driver’s kick panel. 9. Using scissors, cut the protective tape as shown. 10. Pull away the door opening seal in the area shown. 11. Using an alcohol swab, thoroughly clean the vehicle panel where the illuminated door sill trim will attach.