Download 2018 Honda Ridgeline Bicycle Attachment (Roof) Installation Instructions – Installing the Bicycle Attachment 1. Remove the two thumbwheel screws, washers, and bracket. Slide the rear bracket assembly onto the bicycle attachment. 2. Insert the wheel strap into the tire adapter, then slide the wheel strap onto the end of the bicycle attachment. Repeat this on the other end of the attachment. Make sure that both wheel strap buckles are facing the same direction. Insert the four bolts into the front plate.
3. Install the end caps onto the bicycle attachment by
aligning the lock tab on the end cap with the hole in the bicycle attachment. Push on the end cap until the lock tab “clicks” into place. 4. Install the bicycle attachment to the crossbar with two thumbwheel screws and one bracket. Repeat this to install brackets at the other two positions on the bicycle attachment. 5. Close the locking clamp lever. To deter theft of the bicycle attachment, lock the locking clamp lever with the key. 6. Write down the key number in case the key is lost or stolen.