Home Auto Repair How to Install Body Side Moldings on 2018 Honda Ridgeline

How to Install Body Side Moldings on 2018 Honda Ridgeline

88

Download 2018 Honda Ridgeline Body Side Moldings Installation Instructions – 1. Fold the tab, line up the front template with the character lines, and attach it to the left front door with masking tape as shown. 2. Line up the middle template with the character line and attach it to the left front door and left rear door with masking tape as shown. 3. Fold the tab, line up the rear template with the character lines and attach it to the left rear door with masking tape as shown.

4. Using one alcohol swab, thoroughly clean the left front door where the left front body side molding will attach. 5. Peel back the adhesive backings and tape them to the front surface of the left front body side molding. Remove the remaining adhesive backings. 6. Line up the left front body side molding with the front and middle templates and attach it to the left front door as shown. 7. While applying light pressure to the left front body side molding, carefully remove the taped adhesive backings. 8. Using a rubber roller, apply firm pressure while rolling, especially at the ends, to set the adhesive.