Home Auto Repair How to Install the Crossbars on a 2018 Honda Ridgeline

How to Install the Crossbars on a 2018 Honda Ridgeline

133

Download 2018 Honda Ridgeline Crossbars Installation Instructions – Installing the Crossbars 1. Remove the TORX screw from the left rear roof rail cover. 2. Using a plastic trim tool, remove the left rear roof rail cover. 3. Repeat steps 1 and 2 on the other side. 4. Slide the crossbars into the roof rails. Make sure they are inserted in the correct position and direction. 5. Line up the marks on the crossbars with the marks on the roof rails as shown. Tighten the eight thumbwheel screws to secure the crossbars to the roof rails. 6. Install one TORX screw into the left roof rail and tighten it securely.

Repeat on the other side. 7. Install the roof rail covers. Make sure they are securely snapped in place. USE AND CARE • Check the crossbar mounting screws frequently and retighten if necessary. • Distribute the weight of the cargo evenly and do not exceed the maximum weight capacity of 165 lbs (75 kg). NOTE: • Cargo must not exceed the maximum weight capacity of 165 lbs (75 kg). • Clean the roof rails before installing the crossbars. • Do not damage the roof and other finished surfaces when installing the crossbars. • Leave a copy of these installation instructions in the vehicle.