Home Auto Repair How to Install Door Edge Films on 2018 Honda Ridgeline

How to Install Door Edge Films on 2018 Honda Ridgeline

52

Download 2018 Honda Ridgeline Door Edge Films Installation Instructions – 1. Open the left rear door. Pull back the left rear door seal and secure it to the door panel with masking tape as shown. 2. Using the alcohol swab, thoroughly clean the area where the left rear door edge film will attach. 3. Open the left front door. Using the alcohol swab, thoroughly clean the area where the left front door edge film will attach. 4. Close the left front and rear doors. Using a spray bottle with 3M protective tape application solution, spray the area where the left front door edge film will attach.

NOTE: Spray the outer surface of the door only. If the vehicle is equipped with the body side moldings, go to step 7; otherwise, continue with step 5. 5. Open the left front door again. Peel back about 50 mm (1.97 in.) of adhesive backing from the left front door edge film. Align the V-notch in the left front door edge film with the character line of the left front door. 6. Align the mark on the left front door edge film with the end of the left front door. While applying light pressure, carefully remove the adhesive backing. Go to step 10. With Body Side Moldings 7. Using scissors, cut off the left front door edge film as shown.