Download 2018 Honda Ridgeline Fog Lights Installation Instructions – 1. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery. 2. Remove the three self-tapping screws from the left front wheel arch protector. 3. Remove the left front wheel arch protector. 4. Repeat steps 2 and 3 on the right side of the vehicle. 5. Remove the front bumper: • Using a flat-tip screwdriver, remove the H emblem from the front grille.
• Remove the front upper grille. • Apply masking tape as shown on each side. • Remove the four self-tapping screws, eight clips, four washer-bolts, and four flange bolts. • With the help of an assistant, release the seven retaining tabs on each side. • Release the front grille. • With the help of an assistant, remove the front bumper and unplug the vehicle connector. • Place the front bumper on a blanket. 6. Turn the steering wheel fully clockwise. 7. Remove one washer-bolt and one clip and pull back the right front inner fender as shown.