Download 2018 Honda Ridgeline Heated Steering Wheel Installation Instructions – 1. Turn the steering wheel so the front wheels are in the straight-ahead position. 2. Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery, and wait at least 3 minutes before you start to install the steering wheel. 3. Pull away the door opening seal, and remove the driver’s dashboard side lid.
4. Remove the driver’s dashboard under cover, unplug the vehicle connectors, and release the vehicle sensor. 5. Lower the tilt lever, and remove the two TORX bolts. 6. Unplug the two vehicle connectors and the vehicle connector. NOTE: Be careful not to damage the connectors. 7. Remove the airbag. Do not drop the removed airbag or hit it on an object. Place the removed airbag in a safe place with the pad surface (top) facing upward. 8. With the front wheels aligned in the straight forward position, unplug the vehicle connector from the cable reel, and loosen the steering wheel bolt.