Home Auto Repair How to Install Lighted Running Boards on 2018 Honda Ridgeline

How to Install Lighted Running Boards on 2018 Honda Ridgeline

104

Download 2018 Honda Ridgeline Lighted Running Boards Installation Instructions – 1. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the intake air tube. • Disconnect the negative cable from the battery. 2. Remove the passenger’s dashboard under cover and unplug the vehicle connector if equipped. 3. Remove the passenger’s door sill trim. 4. Pull away the door opening seal and remove the passenger’s kick panel.

5. Pull away the door opening seal and remove the driver’s dashboard side lid. 6. Remove the driver’s dashboard lower cover, unplug the vehicle connectors, and release the vehicle sensor. 7. Remove the driver’s door sill trim. 8. Pull away the door opening seal and remove the driver’s kick panel. 9. Using a utility knife, cut out the left side sill panel as shown. Remove any burrs. 10. Remove the undercoating as shown. Apply touch-up paint where you removed the undercoating and allow it to dry thoroughly.