Download 2018 Honda Ridgeline Ski/Snowboard Attachment Installation Instructions – Installing the Ski / Snowboard Attachment 1. Insert the key and turn it clockwise to unlock the ski / snowboard attachment. 2. Push the button and raise the holder block on the ski / snowboard attachment. 3. Turn the two brackets on the ski / snowboard attachment as shown. 4. Using a wrench, install the ski / snowboard attachment to the front crossbar with four bolts, four collars, and two brackets. 5. Repeat steps 1 through 4 to install the other ski / snowboard attachment on the rear crossbar.
6. After installation, rock the ski / snowboard attachment in all directions to make sure it is installed securely without play or rattles. If you find abnormal play or a rattle, retighten the bolts. 7. Write down the key number in the box below in case the key is lost or stolen. How to Load Skis on the Ski / Snowboard Attachment 8. Load the skis with the rear of the skis facing the front of the vehicle. 9. If the bindings cannot be positioned between the front and the rear attachments, install the skis with the rear bindings behind the rear attachment as shown.