Download 2018 Honda Ridgeline Snowboard Attachment Installation Instructions – 1. Rotate the two top clamps perpendicular to the snowboard carrier. 2. Install two board supports on the snowboard carrier. 3. Install four rubber blocks on the top and bottom clamps. Install the rubber blocks with the top of each triangular mark “ ” facing the inside. 4. Turn the cam levers on the top clamp counterclockwise. 5. Attach the two bottom clamps to the two top clamps. 6. Repeat steps 1 thru 5 to assemble the other carrier.
7. Attach one carrier to the front crossbar in the direction shown. Insert the barrel nuts on the top clamp into the square holes in the bottom clamp, and turn the nuts 90° to lock them into position. Install the other carrier to the rear crossbar. 8. Turn the knobs on the top clamp to tighten the front carrier. 9. Return the cam levers to the original location (turn clockwise). 10. To prevent theft, install the screws in the holes in the top clamps. 11. Repeat steps 8 thru 10 to tighten the other carrier. 12. Try to rock the carriers to make sure they are securely installed.