Home Auto Repair How to Install Deck Lid Spoiler on 2019 Acura RLX

How to Install Deck Lid Spoiler on 2019 Acura RLX

156

Download 2019 Acura RLX Deck Lid Spoiler Installation Instructions – 1. Open the trunk lid. Remove trunk floor cover. 2. Remove the trunk tool box. 3. Remove the trunk rear trim panel 4. Remove the two tie down hooks. • Wrap masking tape around the tip of flat-tip screwdriver. • Open the covers. • Remove the two screws. 5. Pull away the weatherstrip, and remove the right trunk side trim. 6. Remove the two tie down hooks. • Wrap masking tape around the tip of flat-tip screwdriver. • Open the covers. • Remove the two screws. 7. Pull away the weatherstrip, and remove the left trunk side trim. 8. Close the trunk lid. Attach the strips of masking tape to the trunk lid as shown.

9. Line up the template A to the trunk lid as shown, and attach it with masking tape. 10. Using a felt-tip pen, mark two points through the template A as shown. Remove the template A. 11. Turn the template A over, and repeat steps 9 and 10 on the right side of the trunk lid. 12. Using a center punch, punch the centers of the four marks. Set the center punch to the minimum power setting. 13. While wearing eye protection, drill four 8.5 mm holes at the marks with a 8.5 mm Rotabroach bit. Drill perpendicular to the trunk lid. Remove the masking tape attached in step 8.