Home Auto Repair How to Install Door Edge Films on 2019 Acura RLX

How to Install Door Edge Films on 2019 Acura RLX

235

Download 2019 Acura RLX Door Edge Films Installation Instructions – 1. Cut the applicator at 45 mm wide. 2. Attach the masking tape to the left front door asshown. 3. Use the alcohol swab to thoroughly clean the areawhere the left front door handle film will attach. 4. Using a spray bottle with 3M protective tapeapplication solution, spray the area where the leftfront door handle film will attach. 5. Remove the adhesive backing from the left frontdoor handle film. NOTE: Check the identification mark and thedirection of the top and bottom.

6. Spray the left front door handle film with the 3Mprotective tape application solution. 7. Line up the edge of the left front door handle film withthe edge of the masking tape as shown. 8. Insert the applicator into the felt sleeve. 9. Starting from the center and working outward, usethe felt sleeve to smooth out the left front door handle film. If you see an air bubble, stop and gently peel upthat section to work out the bubble. Work slowly andkeep pressure against the left front door handle film. 10. Using a shop towel, wipe up the 3M protective tapeapplication solution. Allow the left front door handlefilm to dry thoroughly. Remove the masking tape.