Home Auto Repair How to Install Door Handle Films on 2019 Acura RLX

How to Install Door Handle Films on 2019 Acura RLX

215

Download 2019 Acura RLX Door Handle Films Installation Instructions – 1. Cut the applicator as shown. 2. Attach the masking tape to the left front door as shown. 3. Use the alcohol wipe to thoroughly clean the area where the left front door handle film will attach. 4. Using a spray bottle with 3M protective tape application solution, spray the area where the left front door handle film will attach. Then, spray some solution on your hands. 5. Remove the adhesive backing from the left front door handle film. NOTE: Check the identification mark and the direction of the top and bottom. 6. Spray the left front door handle film with the 3M protective tape application solution.

7. Line up the edge of the left front door handle film with the edge of the masking tape as shown. 8. Insert the applicator into the soft sleeve. 9. Starting from the center and working outward, use the soft sleeve to smooth out the left front door handle film. If you see an air bubble, stop and gently peel up that section to work out the bubble. Work slowly and keep pressure against the left front door handle film. 10. Using a shop towel, wipe of the 3M protective tape application solution. Allow the left front door handle film to dry thoroughly. Remove the masking tape.