Home Auto Repair How to Install Illuminated Door Sill Trims on 2019 Acura RLX

How to Install Illuminated Door Sill Trims on 2019 Acura RLX

198

Download 2019 Acura RLX Illuminated Door Sill Trims Installation Instructions – 1. Turn the ignition to ON. 2. If the vehicle has a shift lever, move the shift lever to the neutral (N) position. 3. Turn the ignition to OFF. 4. Disconnect the negative cable from the battery. 5. Apply tape to the center console panel and the driver’s and passenger’s console side trims as shown. If the vehicle has a shift lever, wrap a shop towel around the shift lever. 6. Remove the center lower trim and unplug the vehicle connectors. 7. Remove the center lower panel and unplug the vehicle connectors. 8. Open the glove box. Pull away the door opening seal, and remove the passenger’s dashboard side
lid.

9. Remove the passenger’s dashboard upper cover and unplug the vehicle connector. 10. Close the glove box. 11. Remove the passenger’s dashboard lower cover and unplug the vehicle connector. 12. Remove the two bolts from the bottom of the glove box. 13. Remove the glove box and unplug the vehicle connectors. 14. Remove the passenger’s front door sill trim. 15. Pull away the door opening seal, and remove the passenger’s kick panel. 16. Pull away the door opening seal, and remove the driver’s dashboard side lid. 17. Remove the driver’s dashboard lower cover. Unplug the vehicle connectors and aspirator hose, then remove the plate.