Home Auto Repair How to Install LED Fog Lights on 2019 Acura RLX

How to Install LED Fog Lights on 2019 Acura RLX

209

Download 2019 Acura RLX LED Fog Lights Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Apply masking tape to the center console panel and the driver’s and passenger’s console side trims as shown. 3. Remove the center lower trim and unplug the vehicle connectors. 4. Remove the center lower panel and unplug the vehicle connectors. 5. Pull away the door opening seal, and remove the driver’s dashboard side lid. 6. Reconnect the negative cable to the battery, then turn the ignition to ON. Lower the steering wheel. 7. Attach masking tape to the upper column cover as shown. 8. Turn the steering wheel 90° counterclockwise.

Using a plastic trim tool, release the retaining tab. 9. Turn the steering wheel 180° clockwise. Using a plastic trim tool, release the retaining tab. 10. Release the upper column cover and secure the upper column cover to the instrument panel with masking tape. 11. Remove one self-tapping screw from the lower column cover. Turn the steering wheel 180° counterclockwise, and remove the other self-tapping screw from the lower column cover. 12. Turn the ignition to OFF, then disconnect the negative cable from the battery. NOTE: The steering wheel automatically moves fully in and up. Make sure that the steering wheel is not interfering with the vehicle parts.