Home Auto Repair How to Install Rear Bumper Applique on 2019 Acura RLX

How to Install Rear Bumper Applique on 2019 Acura RLX

204

Download 2019 Acura RLX Rear Bumper Applique Installation Instructions – 1. Open the trunk lid. Using the alcohol swab, thoroughly clean the area where the rear bumper applique will attach. 2. Using a spray bottle with 3M protective tape application solution, spray the area where the rear bumper applique will attach. 2. Using a spray bottle with 3M protective tape application solution, spray the area where the rear bumper applique will attach. 4. Spray the rear bumper applique with the 3M protective tape application solution. 5. Line up the V-notch on the rear bumper applique with the trunk lid anchor.

Line up the edge of the rear bumper applique with the bottom of the character line. Smooth the rear bumper applique against the rear bumper. Do not touch the adhesive side of the rear bumper applique with your hands. 6. Insert the applicator into the soft sleeve. 7. Starting from the front and working rear ward, use the soft sleeve to smooth out the center of the upper section on the rear bumper applique. Move the soft sleeve in one direction only. If you see an air bubble, stop and gently peel up that section to work out the bubble. Work slowly and keep pressure against the rear bumper applique.