Home Auto Repair How to Install Body Side Moldings on 2019 Acura TLX

How to Install Body Side Moldings on 2019 Acura TLX

123

Download 2019 Acura TLX Body Side Moldings Installation Instructions – 1. Fold the tab located in the center of the template. 2. Fold the six tabs as shown. 3. Line up the template with the character line, and attach the template to the left doors with masking tape as shown. 4. Using one alcohol swab, thoroughly clean the left front door where the left front body side molding will attach. 5. Using one alcohol swab, thoroughly clean the left rear door where the left rear body side molding will attach.

6. Peel back the adhesive backings, and tape them to the front surface of the left front body side molding with masking tape. Remove the small piece of adhesive backing. 7. Line up the left front body side molding with the template and attach it to the left front door as shown. 8. While applying light pressure against the left front body side molding, carefully remove the taped adhesive backings. 9. Using a rubber roller, apply firm pressure against the left front body side molding and roll from one end to the other. Apply firm pressure, especially at the ends.