Home Auto Repair How to Install Door Edge Film on 2019 Acura TLX

How to Install Door Edge Film on 2019 Acura TLX

188

Download 2019 Acura TLX Door Edge Film Installation Instructions – 1. Open the left front door. Using an alcohol swab, thoroughly clean the area where the left front door edge film will attach. 2. Close the left front door. 3. Open the left rear door. Peel back the left rear door lower seal, and secure it to the door panel with masking tape as shown. 4. Using an alcohol swab, thoroughly clean the area where the left rear door edge film will attach. 5. Close the left rear door. 6. Using a spray bottle with the 3M protective tape application solution, spray the outside of the left front door where the left front door edge film will attach.

NOTE: Do not spray the inner surface. If the vehicle is equipped with body side moldings, go to step 9; otherwise, continue with step 7. 7. Open the left front door. Peel back about 50 mm (2.0 in.) of adhesive backing from the left front door edge film. Align the top edge of the protective film with the bottom of the character line below the door handle, and the V-notch with the door edge. 8. Align the center line on the left front door edge film with the door edge. While applying light pressure, carefully remove the adhesive backing. Go to step 12.