Home Auto Repair How to Install Front Under Spoilers on 2019 Acura TLX

How to Install Front Under Spoilers on 2019 Acura TLX

252

Download 2019 Acura TLX Front Under Spoilers Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Apply masking tape to the front bumper, headlights and front fenders as shown. 3. Remove the air intake tube. 4. Remove the front grille cover. 5. Remove the two bolts and three clips from the front grille. 6. Remove the left strake from the front bumper and air dam. 7. Repeat the procedure to remove the right strake. 8. Remove the front bumper: • Remove the two long self-tapping screws, four short self-tapping screws, four clips, and six bolts.

• Release the five retaining tabs on each side. • Release the two retaining tabs on each side. • With the help of an assistant, remove the front bumper. • Unplug the vehicle connectors and remove the clip if equipped. • Place the front bumper on a blanket. 9. Remove the three self-tapping screws from the left fog light cover. 10. Remove the left fog light trim. 11. Repeat steps 9 and 10 for the other side. 12. Using a pushpin, pierce the inside of the front bumper through the center of four scribe marks. NOTE: Make sure to pierce the scribe marks perpendicular to the front bumper.