Download 2019 Acura TLX Parking Sensors Installation Instructions – 1. Disconnect the negative cable from the battery.
2. Pull away the door opening seal, and remove the driver’s dashboard side lid. 3. Remove the left driver’s dashboard lower cover and unplug the vehicle connectors. 4. Apply masking tape to the front bumper, headlights and front fenders as shown. 5. Remove the air intake tube. 6. Remove the front grille cover. 7. Remove the two bolts and three clips from the front grille. 8. Remove the left strake from the front bumper and air dam.
9. Repeat the procedure to remove the right strake. 10. Remove the front bumper: • Remove the two long self-tapping screws, four short self-tapping screws, four clips, and six bolts. • Release the five retaining tabs on each side. • Release the two retaining tabs on each side. • With the help of an assistant, remove the front bumper. • Unplug the vehicle connectors and remove the clip if equipped. • Place a suitable container under the tube end to collect the washer fluid from the washer tube. Refill the washer tank up to the proper level after installing the front bumper.