Download 2019 Acura TLX Rear Seat Covers Installation Instructions – Installing the Head Restraints Covers 1. While pressing on each head restraint guide button, remove the head restraints by pulling them upward. 2. Fit the three head restraints covers over the head restraints. Installing the Seat Side Bolster Covers 3. Pull out the center seat belt from the seat belt guide. 4. Open the trunk. Pull the lever, and fold the rear seat-back forward. 5. Fit the left seat side bolster cover onto the left seat side bolster through the left seat belt.
Insert the tabs to the bolster. Secure the fasteners to the bolster. 6. Repeat step 5 to install the right seat side bolster cover. Installing the Seat-Back Covers and Armrest Cover 7. Route the center seat belt through the left seat-back cover, and fit the left rear seat-back cover to the left rear seat-back. Tuck the cover under each head restraint guide. 8. Pull down the armrest, and secure the fasteners to the seat-back. 9. Fit the right seat-back cover onto the right rear seat-back. Tuck the cover under each head restraint guide.