Home Auto Repair How to Install Rear SH-AWD Emblem on 2019 Acura TLX

How to Install Rear SH-AWD Emblem on 2019 Acura TLX

102

Download 2019 Acura TLX Rear SH-AWD Emblem Installation Instructions – Installing the Rear SH-AWD Emblem 1. Remove the position film from the rear SH-AWD emblem, then remove the rear SH-AWD emblem from the guide form. 2. Install the guide form to the rear SH-AWD emblem on the trunk lid. 3. Attach masking tape along the guide form as shown. 4. Remove the guide form from the trunk lid. 5. Using a piece of string, remove the rear SH-AWD emblem by cutting the outer edges as shown. Make sure to thoroughly remove the adhesive tape from the trunk lid.

6. Install the new rear SH-AWD emblem in the guide form, and temporarily secure it with masking tape. 7. Using the alcohol wipe, thoroughly clean the trunk lid where the rear SH-AWD emblem will attach. 8. Remove the adhesive backing from the rear SH-AWD emblem. Align the guide form with masking tape, and attach the rear SH-AWD emblem to the trunk lid. 9. Using the palm of your hand, firmly press the rear SH-AWD emblem against the trunk lid. 10. Remove the guide form and masking tape from the trunk lid.