Home Auto Repair How to Install Rear Splash Guards on 2019 Acura TLX

How to Install Rear Splash Guards on 2019 Acura TLX

166

Download 2019 Acura TLX Rear Splash Guards Installation Instructions – Installing the Rear Splash Guards 1. Remove the two self-tapping screws from the left rear inner fender. 2. Peel back the left rear inner fender. 3. Slightly compress one spring nut, and install the spring nut over the hole in the rear bumper. NOTE: Make sure to install the spring nut in the correct orientation. 4. Install two spring nuts to the left bracket as shown. NOTE: • Make sure to install the spring nuts in the correct orientation. • Check the identification mark of the left bracket.

5. Install the left bracket to the left rear inner fender with two 5 x 25 mm self-tapping screws in the order shown. 6. Secure the left bracket to the rear bumper with one 5 x 25 mm self-tapping screw. Thread the self-tapping screw into the spring nut through the left rear inner fender. 7. Slightly compress one spring nut, and install the spring nut to the left rear inner fender as shown. NOTE: Make sure to install the spring nut in the correct orientation. 8. Install one spring nut to the left rear splash guard as shown. NOTE: Make sure to install the spring nut in the correct orientation.