Home Auto Repair How to Install Rear TLX Emblem on 2019 Acura TLX

How to Install Rear TLX Emblem on 2019 Acura TLX

190

Download 2019 Acura TLX Rear TLX Emblem Installation Instructions – Installing the Rear TLX Emblem 1. Remove the position film from the rear TLX emblem, then remove the rear TLX emblem from the guide form. 2. Install the guide form to the rear TLX emblem on the trunk lid. 3. Attach masking tape along the guide form as shown. 4. Remove the guide form from the trunk lid. 5. Using a piece of string, remove the rear TLX emblem by cutting the outer edges as shown. Make sure to thoroughly remove the adhesive tape from the trunk lid.

6. Install the new rear TLX emblem in the guide form, and temporarily secure it with masking tape. 7. Using the alcohol wipe, thoroughly clean the trunk lid where the rear TLX emblem will attach. 8. Remove the adhesive backing from the rear TLX emblem. Align the guide form with masking tape, and attach the rear TLX emblem to the trunk lid. 9. Using the palm of your hand, firmly press the rear TLX emblem against the trunk lid. 10. Remove the guide form and masking tape from the trunk lid. NOTE: • Be careful not to damage the paint finish.