Home Auto Repair How to Install Rear Under Spoilers on 2019 Acura TLX

How to Install Rear Under Spoilers on 2019 Acura TLX

173

Download 2019 Acura TLX Rear Under Spoilers Installation Instructions – 1. Using a pushpin, pierce the inside of the rear bumper through the center of four scribe marks on the inside of the rear bumper. NOTE: Make sure to pierce the scribe marks perpendicular to the rear bumper. 2. While wearing eye protection, drill the four pierced marks to 6 mm. First, drill with a 3 mm drill bit, then finish with a 6 mm drill bit. NOTE: Wrap masking tape around drill bits 10 mm (0.39 in.) from the tip, or use a drill stop. Make sure to drill perpendicular to the rear bumper.

3. While wearing eye protection, enlarge the two 6 mm holes and one bottom hole to 10 mm. First, drill with an 8 mm drill bit, then finish with a 10 mm drill bit. NOTE: Wrap masking tape around drill bits 10 mm (0.39 in.) from the tip, or use a drill stop. Make sure to drill perpendicular to the rear bumper. To ensure proper clip engagement, be sure to remove any burrs. 4. While wearing eye protection, enlarge the two 6 mm holes to 12 mm. First, drill with an 8 mm drill bit, then finish with a 12 mm drill bit. NOTE: Wrap masking tape around drill bits 10 mm (0.39 in.) from the tip, or use a drill stop.