Home Auto Repair How to Install Spare Tire Kit on 2019 Acura TLX

How to Install Spare Tire Kit on 2019 Acura TLX

177

Download 2019 Acura TLX Spare Tire Kit Installation Instructions – 1. Using isopropyl alcohol on a shop towel, clean the spare tire rim in the area shown. 2. Remove the adhesive backing from the caution label, and attach the caution label to the spare tire rim in the area shown. 3. Using a tire changer, install the spare tire (sold separately) onto the spare tire rim according to the operation manual instructions. Inflate the spare tire to 60 psi (420 kPa). Installing the Spare Tire Kit 4. Remove the trunk floor cover and set it aside; it will not be reused. 5. Remove the rear panel lining and set it aside; it will not be reused.

6. Remove the tool box and set it aside; it will not be reused. 7. Transfer the tools from the old tool box to the new tool box. 8. Install the jack, the wheel nut wrench/jack handle, and the extension bar into the new tool box. 9. Install the new panel lining. 10. Place the spare tire spacer with the arrow facing up and pointing towards the front of the vehicle. 11. Install the spare tire assembly into the spare tire area (label side down), and secure it to the vehicle using the spare tire bolt provided. Tighten the bolt securely.