Home Auto Repair How to Install a Trunk Spoiler on a 2019 Acura TLX

How to Install a Trunk Spoiler on a 2019 Acura TLX

175

Download 2019 Acura TLX Trunk Spoiler Installation Instructions – 1. Open the trunk lid. Remove two clips from the left and right trunk hinge trims. 2. Remove the trunk panel from the trunk lid. 3. Close the trunk lid. Place template A on the trunk lid, and align it with the center of the emblem and character line of the trunk lid. Tape template A to the trunk lid with four pieces of masking tape. 4. Set a center punch to the minimum power setting, and mark the trunk lid through the hole in template A. Remove template A. 5. Fold six tabs on template B as shown.

6. Place template B on the trunk lid, insert six tabs and align it with the left edge of the trunk lid. Tape template B to the trunk lid with four pieces of masking tape. 7. Using a center punch, mark the trunk lid through the hole in template B. Remove template B. 8. Flip template B over, and mark the right side of the trunk lid the same way. 9.While wearing eye protection, use a 7 mm Rotabroach bit to drill the trunk lid at the centerpunched mark. 10. While wearing eye protection, use an 8.5 mm Rotabroach bit to drill the trunk lid at the two outer centerpunched marks.