Home Auto Repair How to Install Door Edge Film on 2019 Acura RDX

How to Install Door Edge Film on 2019 Acura RDX

131

Download 2019 Acura RDX Door Edge Film Installation Instructions – 1. Open the left front door. Using the alcohol wipe, thoroughly clean the area where the left front door edge film will attach. 2. Open the left rear door. Peel back the left rear door seal, and secure it to the left rear door panel with masking tape as shown. 3. Using the alcohol wipe, thoroughly clean the area where the left rear door edge film will attach. 4. Close the left front and rear doors. Using a spray bottle with 3M protective tape application solution, spray the area where the left front door edge film will attach. NOTE: Spray the outer surface of the door only.

If the vehicle is equipped with the body side moldings, go to step 7; otherwise, continue with step 5. Without Body Side Moldings 5.Open the left front door. Peel back about 50 mm (1.97 in.) of the adhesive backing from the left front door edge film. Line up the left front door edge film with the left front door as shown. NOTE: Check the identification mark of the left front door edge film. 6. While applying light pressure, carefully remove the adhesive backing. Go to step 11. With Body Side Moldings 7.Using scissors, cut off the left front door edge film as shown. NOTE: Check the identification mark of the left front door edge film.