Home Auto Repair How to Install Door Edge Guards on 2019 Acura RDX

How to Install Door Edge Guards on 2019 Acura RDX

44

Download 2019 Acura RDX Door Edge Guards Installation Instructions – Installing the Door Edge Guards 1. Open the left front door. Pull away the door opening seal from the left rear door as shown. 2. Remove the seven clips from the left rear door. 2. Remove the seven clips from the left rear door. 4. Gently place the left front door edge guard on the left front door. Line up the left front door edge guard with the contour of the left front door. 5. Using a felt-tip pen, mark the sealant at the top and bottom edges of the left front door edge guard.

6. Remove the left front door edge guard from the left front door. 7. Position the cutting edge of the seam sealant cutting tool against the door edge, and carefully trim the seam sealant from mark to mark. NOTE: The cutting tool cuts in only one direction. 8. Apply touch-up paint to the cut seam sealant area, and let it dry thoroughly. 9. Carefully remove the left rear door seal in the area shown. 10. Secure the left rear door seal with masking tape as shown. Gently place the left rear door edge guard on the left rear door. Line up the left rear door edge guard with the contour of the left rear door.