Home Auto Repair How to Install Door Handle Films on 2019 Acura RDX

How to Install Door Handle Films on 2019 Acura RDX

139

Download 2019 Acura RDX Door Handle Films Installation Instructions – Installing the Door Handle Films 1. Using the alcohol wipe, thoroughly clean the area where the left front door handle film will attach. 2. Using a spray bottle with the 3M protective tape application solution, spray the area where the front door handle film will attach. 3. Remove the adhesive backing from left front door handle film. NOTE: Make sure to check the identification mark before installation. 4. Spray the left front door handle film and protective film with the 3M protective tape application solution.

5. Line up the protective film with the left front door handle as shown. 6. Starting from the center and working outward, use the mini soft spreader/applicator to smooth out the left front door handle film. If you see an air bubble, stop and gently peel up that section to work out the bubble. Work slowly and keep pressure against the left front door handle film. 7. Remove the protective film from the left front door handle film. Using a shop towel, wipe off the 3M protective tape application solution. Allow the left front door handle film to dry thoroughly. 8. Repeat steps 1 through 7 for the remaining door handle films.