Home Auto Repair How to Install RDX Emblem on 2019 Acura RDX

How to Install RDX Emblem on 2019 Acura RDX

111

Download 2019 Acura RDX Emblem Installation Instructions – Installing the RDX Emblem 1. Remove the position film from the RDX emblem, then remove the RDX emblem from the guide form. 2. Install the guide form to the vehicle RDX emblem on the tailgate. 3. Attach masking tape along the guide form as shown. 4. Remove the guide form from the tailgate. 5. Using a piece of nylon string, remove the vehicle RDX emblem by cutting along the outer edges as shown. Make sure to thoroughly remove the adhesive tape from the tailgate.

6. Install the RDX emblem in the guide form, and temporarily secure it with masking tape. 7. Using the alcohol wipe, thoroughly clean the tailgate where the RDX emblem will attach. 8. Remove the adhesive backing from the RDX emblem. Line up the guide form with masking tape, and attach the RDX emblem to the tailgate. 9. Using the palm of your hand, firmly press the RDX emblem against the tailgate for 30 seconds. 10. Remove the guide form and masking tape from the tailgate. NOTE: • Be careful not to damage the paint finish.