Download 2019 Acura RDX Floor Mats Installation Instructions – Installing the Floor Mats 1. If equipped, remove the standard floor mats as described in the owner’s manual. 2. Place the grommets in the driver’s floor mat over the anchors. Push the grommets into the anchors to secure the retaining tabs, then turn the knobs 90° to secure the driver’s floor mat. 3. Place the grommets in the passenger’s floor mat over the anchors. Push the grommets into the anchors to secure the retaining tabs, then turn the knobs 90° to secure the passenger’s floor mat. 4. Place the rear floor mat as shown.
NOTE: • Before installing the floor mats, identify their installation positions. • Connect the floor mat to the anchors to prevent it from sliding forward and possibly interfering with the pedals. • If you remove a floor mat, make sure you anchor it when you put it back in your vehicle. • If you replace a floor mat, use a factory floor mat designed to be used with the anchors. • If you use a non-factory floor mat in the driver’s footwell, make sure it fits properly and that it can be used with the anchors. • Do not put an additional floor mat on top of the anchored floor mat. It may slide forward and possibly interfere with the pedals.