Home Auto Repair How to Install the Fog Lights on a 2019 Acura RDX

How to Install the Fog Lights on a 2019 Acura RDX

111

Download 2019 Acura RDX Fog Lights Installation Instructions – 1. Lower and pull out the steering wheel as shown. 2. Apply masking tape to the upper column cover. 3. Turn the ignition to ON. Turn the steering wheel 90° counterclockwise. Using a plastic trim tool, release the upper column cover. 4. Turn the steering wheel 180° clockwise. Using a plastic trim tool, release the upper column cover. 5. Secure the upper column cover to the dashboard with masking tape. 6. Remove the self-tapping screw from the lower column cover.

7. Turn the steering wheel 180° counterclockwise, and remove the other self-tapping screw from the lower column cover. 8. Lower the lower column cover. 9. Turn the ignition to OFF, then disconnect the negative cable from the battery. 10. Unplug the vehicle connector from the combination light switch. 11. Push in on two retaining tabs, slide the combination light switch out, and remove it from the steering column. NOTE: Do not pull on the lever. 12. Install the new combination light switch to the steering column. Make sure both retaining tabs are locked in place. NOTE: Do not push on the lever.