Home Auto Repair How to Install Front Lower Trim on 2019 Acura RDX

How to Install Front Lower Trim on 2019 Acura RDX

69

Download 2019 Acura RDX Front Lower Trim Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Wrap a shop towel around the hood latch. 3. Remove the front bulkhead cover. 4. Remove the front bumper: • Apply masking tape as shown. • Remove the two self-tapping screws (long), two self-tapping screws, six clips (long), six clips, four clips (short), five bolts (short), and two bolts as shown. • With the help of an assistant, release the six retaining tabs on each side. • With the help of an assistant, remove the front bumper, and unplug the vehicle connectors (if equipped).

• Place the front bumper on a blanket. 5. Remove the self-tapping screw, clip, and bolt from the front bumper. If the vehicle is equipped with fog lights, continue with step 6; otherwise, go to step 7. With fog lights 6. Unplug the vehicle connector, and release the vehicle harness from the front bumper as shown. Remove the left fog light from the left fog light cover. If the vehicle is equipped with parking sensors, continue with step 7; otherwise, go to step 8. With parking sensors 7. Unplug the vehicle connector, and release the vehicle harness from the front bumper as shown.