Home Auto Repair How to Install Illuminated Door Sill Trims on 2019 Acura RDX

How to Install Illuminated Door Sill Trims on 2019 Acura RDX

50

Download 2019 Acura RDX Illuminated Door Sill Trims Installation Instructions – 1. Disconnect the negative cable from the battery. 2. Remove the passenger’s dashboard under cover, and unplug the vehicle connector. 3. Remove the passenger’s door sill trim. 4. Pull away the door opening seal, and remove the passenger’s kick panel. 5. Pull away the door opening seal, and remove the driver’s dashboard side lid. 6. Remove the driver’s dashboard side vent. 7. Remove the left trim, and unplug the vehicle connector. 8. Remove the driver’s dashboard lower cover, and unplug the vehicle connectors and vehicle sensor.

9. Remove the driver’s door sill trim. 10. Pull away the door opening seal, and remove the driver’s kick panel. 11. Remove the three clips from the driver’s door sill trim, then install the clips on the left illuminated door sill trim. NOTE: Check the shape of the left illuminated door sill trim. 12. Using isopropyl alcohol on a shop towel, thoroughly clean the fuse case where the fuse label will attach. Attach the fuse label (2A STEP ILLUMI) to the fuse case on the door sill trim harness. 13. Plug the door sill trim harness 2-pin connector into the left illuminated door sill trim 2-pin connector.