Home Auto Repair How to Install Rear Bumper Appliques on 2019 Acura RDX

How to Install Rear Bumper Appliques on 2019 Acura RDX

159

Download 2019 Acura RDX Rear Bumper Appliques Installation Instructions – Installing the Rear Bumper Appliques 1. Open the tailgate. Use the alcohol wipe to thoroughly clean the area where the rear bumper appliques will attach. 2. Using a spray bottle with the 3M protective tape application solution, spray the area where the rear bumper appliques will attach. 3. Remove the adhesive backing from the side of the upper rear bumper applique with the 3M mark. NOTE: Make sure to check the shape before installation. 4. Spray the upper rear bumper applique with the 3M protective tape application solution.

5. Line up the edge of the protective film of the upper rear bumper applique with the edge of the curved surface on the rear bumper. Line up the V-notch in the center of the upper rear bumper applique with the center of the striker. 6. Insert the applicator into the soft sleeve. 7. Starting from the front and working rearward, use the soft sleeve to smooth out the center of the upper section on the upper rear bumper applique. Move the soft sleeve in one direction only. If you see an air bubble, stop and gently peel up that section to work out the bubble.