Download 2019 Acura RDX Rear SH-AWD Emblem Installation Instructions – Installing the Rear SH-AWD Emblem 1. Remove the position film from the rear SH-AWD emblem, then remove the rear SH-AWD emblem from the guide form. 2. Install the guide form to the vehicle rear SH-AWD emblem on the tailgate. 3. Attach masking tape along the guide form as shown. 4. Remove the guide form from the tailgate. 5. Using a piece of nylon string, remove the vehicle rear SH-AWD emblem by cutting along the outer edges as shown. Make sure to thoroughly remove the adhesive tape from the tailgate.
6. Install the rear SH-AWD emblem in the guide form, and temporarily secure it with masking tape. 7. Using the alcohol wipe, thoroughly clean the tailgate where the rear SH-AWD emblem will attach. 8. Remove the adhesive backing from the rear SH-AWD emblem. Line up the guide form with masking tape, and attach the rear SH-AWD emblem to the tailgate. 9. Using the palm of your hand, firmly press the rear SH-AWD emblem against the tailgate for 30 seconds. 10. Remove the guide form and masking tape from the tailgate.