Home Auto Repair How to Install the Running Boards on a 2019 Acura RDX

How to Install the Running Boards on a 2019 Acura RDX

240

Download 2019 Acura RDX Running Boards Installation Instructions – 1. With the vehicle on a lift, remove the left floor under cover. 2. Remove the right floor under cover. 3. Using a pushpin, pierce the left floor under cover through the center of 12 dimples. NOTE: There are several markings on the left floor under cover. Before piercing the left floor under cover, verify you have the correct locations. Make sure to pierce perpendicular to the left floor under cover. 4. While wearing eye protection, drill the 12 pierced marks on the left floor under cover to 10 mm. First, drill with a 3 mm drill bit, then follow with a 6 mm drill bit and 8 mm drill bit, and finish with a 10 mm drill bit.

NOTE: Make sure to drill perpendicular to the left floor under cover. 5. While wearing eye protection, use an air saw to cut off the left floor under cover along the scribe lines as shown. Remove any burrs. 6. Repeat steps 3 through 5 on the right floor under cover. 7. Install the left floor under cover and right floor under cover. 8. Loosely secure left bracket A, left bracket B, and left bracket C to the vehicle panel with six flange bolts. 9. With the help of an assistant, loosely secure left running board to the left bracket A, left bracket B, and left bracket C with the three flange bolts.