Download 2019 Acura RDX Spare Tire Kit Installation Instructions – 1. Using isopropyl alcohol on a shop towel, clean the spare tire rim as shown. 2. Remove the adhesive backing from the caution label, and attach the caution label to the spare tire rim as shown. NOTE: Place the label next to the valve stem. 3. Use a tire changer to install the spare tire (sold separately) onto the spare tire rim. Inflate the spare tire to 60 psi (420 kPa). Installing the Spare Tire Kit 4. Open the tailgate, and remove the cargo floor board. 5. Remove the four tie-down hooks.
6. Remove the left and right cargo strips. 7. Remove the plug cap, then the rubber plug from the floor pan through the rear cargo bin. 8. Remove the tool box lid and set it aside. 9. Remove the cargo bin. 10. Remove the clip, then remove the tool box and set it aside 11. Install the wheel nut wrench, jack handle bar, jack and emergency nozzle in to the new tool box. 12. Install the new tool box and reuse the removed clip. 13. Install the spare tire hoist with the five bolts included in the kit, and torque the bolts to 16 lb·ft (22 N•m).