Home Auto Repair How to Install 20-inch Aluminum Wheel on 2019 Acura MDX

How to Install 20-inch Aluminum Wheel on 2019 Acura MDX

130

Download 2019 Acura MDX 20-inch Aluminum Wheel Installation Instructions – 1. Before installing the tire pressure sensor, clean the mating surface on the sensor and the aluminum wheel. 2. Install the tire pressure sensor and the washer on
the aluminum wheel and tighten the valve nut fingertight. Make sure the pressure sensor is resting on the wheel. 3. While holding the tire pressure sensor against the wheel, tighten the valve nut to the specified torque. Tightening torque: 5.9 lb·ft (8 N·m) 4. Install the tires according to the instructions in the service information.

5. Install the wheels on the vehicle and torque to 80 lb·ft (108 N·m). 6. Drive the vehicle for at least 40 seconds at a speed of 15 mph (24 km/h) or more, and all sensor IDs will be memorized automatically. Models equipped with standard 20” wheels. The accessory tire and loading information label is not used. Do step 7 for models not equipped with standard 20” wheels. 7. Open the driver’s door. Using isopropyl alcohol on a shop towel, clean the area where the accessory tire and loading information label will attach. Remove the adhesive backing from the accessory tire and,…