Download 2019 Acura MDX Body Side Moldings Installation Instructions – 1. Fold the three tabs in the direction shown. 2. Line up the two tabs of the front template onto the left front door as shown. 3. Attach the front template to the left front door using strips of masking tape. 4. Fold the five tabs in the direction shown. 5. Line up the middle template onto the left front and rear doors as shown. 6. Attach the middle template to the left front and rear doors using strips of masking tape. 7. Fold the three tabs in the direction shown.
8. Line up the two tabs of the rear template onto the edge of the left rear door as shown. 9. Attach the rear template to the left rear door using strips of masking tape. 10. Using two alcohol swabs, clean the door surfaces above the templates where the body side moldings will attach. Allow the alcohol to dry before installing the body side moldings. Installing the Front Body Side Moldings 11. Peel back about 40 to 50 mm (1.5 to 2.0 in.) of adhesive backing from each adhesive strip, and tape the ends to the front surface of the left front body side molding. Remove the other adhesive backings.