Home Auto Repair How to Install a Cargo Cover on a 2019 Acura MDX

How to Install a Cargo Cover on a 2019 Acura MDX

57

Download 2019 Acura MDX Cargo Cover Installation Instructions – 1. Pull each lever, and fold down the left and right third row seats. 2. At the rear of the left rear side trim panel, use your finger to locate the two pre-drilled holes in the panel under the carpet. 2. At the rear of the left rear side trim panel, use your finger to locate the two pre-drilled holes in the panel under the carpet. 4. While wearing eye protection, drill a 14 mm lower hole in the left rear side trim panel: • Wrap tape around an 8 mm and a 14 mm drill bits, 10 mm (0.4 in.) away from the tip, or use a
drill stop.

• First drill with an 8 mm drill bit, and finish with a 14 mm drill bit. • Remove any burrs. 5. Thread one bolt into one anchor. 6. Install the left catch to the left rear side trim panel with anchor. Adjust the anchor to the horizontal position. 7. Repeat steps 2 through 6 to install an anchor on the right side of the vehicle. Installing the Cargo Cover 8. Using a plastic trim tool, remove the cover from the left and right rear side trim panels by releasing the retaining tabs. Save the covers so they can be reinstalled when the cargo cover is removed.