Home Auto Repair How to Install Door Edge Films on 2019 Acura MDX

How to Install Door Edge Films on 2019 Acura MDX

189

Download 2019 Acura MDX Door Edge Films Installation Instructions – 1. Open the left front door. Using an alcohol swab, thoroughly clean the area where the left front door edge film will attach. 2. Open the left rear door. Secure the door opening seal to the left rear door using strips of masking tape. 3. Using an alcohol swab, thoroughly clean the area where the left rear door edge film will attach. 4. Close the left front and rear doors. Using a spray bottle with 3M Protective Tape Application Solution, spray the area where the left front door edge film will attach.

NOTE: Spray the outer surface of the door only. If the vehicle is equipped with the body side moldings, go to step 7; if not, continue to step 5. 5. Open the left front door again. Peel back about 50 mm (2.0 in.) of adhesive backing from the left front door edge film. Line up the V-notch in the left front door edge film with the character line of the left front door. 6. Line up the mark on the left front door edge film with the end of the left front door. While applying light pressure, carefully remove the adhesive backing, and attach the left front door edge film to the left front door.