Download 2019 Acura MDX Door Edge Guards Installation Instructions – 1. Clean and wax the areas to be covered. Use a high-quality paste wax. 2. Identify each door edge guard by holding it up to the door and matching its contour with the door edge. 3. Using the bends for reference, position each door edge guard against the inside edge of the door. Mark the sealant at the top and bottom ending points of each door edge guard. 4. Position the cutting edge of the seam sealant cutting tool against the door edge and trim the seam sealant from mark to mark.
NOTE: The seam sealant cutting tool only cuts in one direction. Move it upward on the right side on the vehicle and downward on the left side. 5. Apply touch-up paint to the door and let it dry. 6. Using the bends for reference, position the door edge guard on the door edge. Starting at the character line, use a rubber mallet to tap the door edge guard into position with a series of light taps. NOTE: Be sure to use a series of light taps. Once in place, do not remove, reposition, or reinstall the door edge guard. It will not hold securely.