Home Auto Repair How to Install Door Handle Films on 2019 Acura MDX

How to Install Door Handle Films on 2019 Acura MDX

207

Download 2019 Acura MDX Door Handle Films Installation Instructions – 1. Use the alcohol wipe to thoroughly clean the area where the left front door handle film will attach. 2. Using a spray bottle with 3M protective tape application solution, spray the area where the left front door handle film will attach. 3. Remove the adhesive backing from the left front door handle film. NOTE: Check the identification mark and the direction of the top and bottom. 4. Spray the left front door handle film with the 3M protective tape application solution. 5. Line up the protective film with the left front door handle as shown.

6. Starting from the center and working outward, use the mini soft spreader/applicator to smooth the left front door handle film. If you see an air bubble, stop and gently peel up that section to work out the bubble. Work slowly and keep pressure against the left front door handle film. 7. Using a shop towel, wipe off the 3M protective tape application solution. Allow the left front door handle film to dry thoroughly. 8. Repeat steps 1 through 7 to install the left rear and right sides. 9. Slowly remove the protective film from the left front door handle film. NOTE: Do not pull up on the protective film.