Home Auto Repair How to Install the Fog Lights on a 2019 Acura MDX

How to Install the Fog Lights on a 2019 Acura MDX

159

Download 2019 Acura MDX Fog Lights Installation Instructions – 1. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the air intake tube. • Disconnect the negative cable from the battery. 2. Remove the front bumper: • Apply masking tape as shown on each side. • Remove the air intake guide. • Remove the four self-tapping screws, the two push rivet clips, the four clips, the four short clips, the four washer-bolts, and the four flange bolts.

• Release the three retaining tabs on each side. • With the help of an assistant, release the four retaining tabs on each side. • With the help of an assistant, release the front bumper and unplug the vehicle connector. • If the vehicle is equipped with headlight washers, place a suitable container under the tube end to collect the washer fluid. Disconnect the headlight washer tube. • Remove the front bumper. Place the front bumper on the blanket to prevent damage. 3. Remove one washer-bolt and one clip and pull back the right front inner fender as shown.