Home Auto Repair How to Install Illuminated Door Sill Trims on 2019 Acura MDX

How to Install Illuminated Door Sill Trims on 2019 Acura MDX

139

Download 2019 Acura MDX Illuminated Door Sill Trims Installation Instructions – 1. Disconnect the negative cable from the battery: • Wrap a shop towel around the hood latch. • Remove the front bulkhead cover. • Remove the air intake tube. • Disconnect the negative cable from the battery. 2. Remove the passenger’s center console side cover. 3. Remove the passenger’s dashboard under cover and unplug the vehicle connectors. 4. Remove the passenger’s front door sill trim. 5. Pull away the door opening seal and remove the passenger’s kick panel. 6. Remove the passenger’s front side outer trim.

7. Pull away the door opening seal and remove the driver’s dashboard side lid. 8. Remove the driver’s dashboard side vent. 9. Remove the driver’s outer dashboard trim. 10. Remove the driver’s dashboard lower cover. 11. Remove the driver’s front door sill trim. 12. Pull away the door opening seal and remove the driver’s kick panel. 13. Remove the driver’s front side outer trim. 14. Remove the second row seat left front foot cover. 15. Move the left rear seat forward and remove the left rear side upper trim. 16. Remove the left rear door sill trim. 17. Remove the left B-pillar lower trim.